Home> News
November 21, 2020

Aluminum Processing

Aluminum scrap, in the form of turnings, filings, chips and shavings, ecohydraulic briquetting machine uses hydraulic to compress aluminum scrap into dense briquettes and separate any fluids used in the metalworking process from the scrap metal, allows manufacturers to both eliminate costs and create a new revenue.

November 21, 2020

Steel Processing

Y83W series horizontal metal scrap briquetting machine is specially designed for foundry and metal scrap processing industry. 1) on the basis of vertical briquetting press, scraps can be pressed can be within 10cm. 2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips etc.

November 21, 2020

Copper Processing

Copper shavings, chips, turnings and filings take valuable space, time and resources to deal with, Ecohydraulic briquetters turn your scrap copper into compressed blocks that are easier to handle, store and transport and can be sold for recycling. Our briquette machine compresses your copper with no added materials, so the quality and purity of the metal are maintained, this maximizes the value of the copper.

September 01, 2021

The first 2000ton horizontal briquette machine

Y83W-2000 horizontal steel briquette making machine, briquette diameter 410mm, block weight about 200kg, total power 600kw, output about 32t/h.

November 21, 2020

Iron Processing

Particle shape cast iron powder can be cold pressed to cylindrical briquettes by SBJ series briquetting press, to a density of 5.5~6ton/m3 (adhesion agent is not used) and the production could be 8~20 tons per shift. The machine is vertical structure with upper and lower beams made of cast steel. The whole working process is automatic (PLC controlled). It also can be equipped with different cooling system. F

November 21, 2020

Ecohydraulic Baler

All kinds of metal scraps, waste steel, copper, aluminum shavings, car shells, etc., is produced every day of production, our hydraulic metal baler can compress every kinds of metal leftover materials into qualified charging such as square, cylinder, octagon body and other shaps. This machine reduce your cost of transporation and smelting, is mainly suitable for steel recovering and processing industries, ferrous and non-ferrous smelt industries:

November 21, 2020

Ecohydraulic Shear

Ecohydraulic alligator shear cut scrap metal into smaller pieces and help to separate different materials types, earning you more money from your scrap metals. Alligator shears are ideal for waste materials recycling processing industries, scrap metal (iron, steel, steel pipe, etc.) cold shearing to different section forms of middle and small steel factories. With operator safety uppermost in mind, our shears are equipped with blade guards and foot opera

July 24, 2021

Seven 250ton automatic balers to Brazil

We have been working with same customer for many years, each baler can be customized.

July 16, 2021

Customized Aluminum Chips Horizontal Briquetting Press

This horizontal briquette machine with double bale discharge hole is used for aluminum recycling, specially for large manufacturer and recycling center, with integrated feeding system and briquetting system, divided into the following structure: 1) dual mode discharge structure, capacity 1

July 15, 2021

How to choose your baler correctly

1) If your scrap material is scrap metals, non-ferrous metals, color metals, we recommend Y81F series metal baler to you, which has high pressing force with bales tilting out design. 2) If your scrap material is lightweight metals, such as scrap aluminium,scrap copper,tin cans ,buckets, we recommend

July 13, 2021

Ecohydraulic cans baler

We Ecohydraulic customize balers especially for cans, tin cans, aluminum cans and other loose metal materials, mostly are exported to Brazil.

July 13, 2021

Ecohydraulic workshop

We factory professionally manufacture kinds of metal recycling machines for 31 years.

July 03, 2021

Metal Scrap Briquette Machine In Russia

We have agent in Russia, every year, we exported several machines to Russia.

July 02, 2021

Aluminum Shavings Briquetting Machine Onsite

Y83L series aluminum shavings briquetting machine is designed specially for aluminum chips & shavings or other light thin metal scrap. Its density can be 2.3t/m3.

July 01, 2021

Baler Maintenance

Correctly use the equipment, strictly carry out the maintaining system and obey to the safety operation rule so as to prolong the using life of machine, improve the production efficiency and guarantee the production. Therefore, we suggest user to establish the maintaining system and safety operational rule, let the operators familiar with machine structure and operational procedure. Otherwise, pay attention to following key points:

July 01, 2021

Briquette Machine Maintenance

1. Before work of each shaft, the machine should be checked fully. If oil leakage is found, please replace seal component in time. 2. Before start, check whether the oil level in oil tank is lower, and open the circulation cooling water.

July 01, 2021

Metal Recycling Process

Scrap metal recycling includes the recovery and processing of scrap metal from end-of-life products as well as from manufacturing scrap, so that it can be introduced into new goods. Scrap metal recycling includes a number of steps such as recovery, sorting, brokering, baling, shearing, smelting, etc.

July 01, 2021

Metal Chips Briquetter Aluminum Shavings Briquetting Press

Metal chips briquetter is mainly used in steel manufacturer and many waste disposal recycling center, it can compress many materials such as iron scraps, aluminum scraps, stainless steel scraps, copper scraps and other ferrous and non-ferrous metals shavings, chips, turnings, borings, etc. Working principle: The metal chips is put into the bunker, transferred to the hopper by conveyor, then the main cylinder starts to press the chips, the side cylinder pushes the block out, at last, e

July 01, 2021

How to build a scrap metal baler

Metal Baler finds wide application in steel mills, metal recycling and processing industry, and metal smelting industry. Using metal baler to extrude various metal scrap into bales can reduce storage space and transportation cost, meanwhile increase feeding speed. To buy a metal baler, there are a few tips to be noted. Bale shape, press chamber size and bale discharge way. Metal baler has large economic value and environment val

July 01, 2021

Drum baler production line

Hydraulic Oil Drums Baling Machine Press Crusher Compactor is designed to crush strandard 55 gallon steel drums, Siemens PLC automatic control, crushing chamber completely enclosed. Ecohydraulic automatic drum compactor is a kind of machine that specially designer by Ecohydraulic. It is applied to compress drums/barrels, automatically control. Production can reach to 4 drums/minute, 240 drums/hour. Extremely high production capacity.

July 01, 2021

New Product Catalytic Converter Decanner

The DeCanning of catalytic converters, containing ceramic honeycomb bricks, implies opening the converter in order to separate the ceramic brick from the steel can. This operation is done by hydraulic shear. Alternative processes include a plasma cutter for big catalytic converter and DPF(Diesel Particulate Filter). Whaterver the process used, make sure to pay proper attention to dust collection and safety.

July 01, 2021

Metal Recycling Exhibition

We Ecohydraulic attends many exhibitions all over the world.

Contact

  • Tel: 86-18360815626
  • Whatsapp: +8618360815626
  • Email: kay@gsyyj.com
  • Address: No. 1019 Chengyang Road, Jiangyin City, Jiangsu Province, Wuxi, Jiangsu China

Send Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send